Enduro · Two stroke

Rieju MR Pro 300

Sold in Australia from 2021 to 2026, 6 model years. Below: the service intervals the MWMX Digital Garage runs on a MR Pro 300, the parts assigned to fit it, and the used ones for sale on the Marketplace right now.

Servicing a MR Pro 300

Engine hours between jobs, the schedule the Digital Garage tracks for you. Ride hard, in sand or mud, and halve the engine ones.

JobEvery
Air filter clean and re-oil3h
Chain clean, lube and adjust5h
Spoke tension check10h
Fastener torque check10h
Transmission oil change15h
Cables and throttle lube15h
Air boot and intake seal check25h
Spark plug replace25h
Rings only replace30h
Silencer repack30h
Linkage bearings grease30h
Rear brake pads30h
Power valve clean40h
Tyres inspect / replace40h
Tubes and rim locks40h
Clutch plates inspect50h
Chain slider, guide and roller50h
Front brake pads50h
Grips inspect / replace50h
Top end rebuild (piston and rings)60h
Reed valve inspect60h
Fork service (oil and seals)60h
Swingarm bearings grease60h
Steering head bearings grease60h
Wheel bearings inspect60h
Radiator, hoses and clamps60h
Carburettor / throttle body clean80h
Chain and sprockets replace80h
Shock service80h
Wiring and connectors80h
Bottom end inspect / rebuild100h
Water pump seal and impeller100h
Brake discs inspect100h

Parts that fit a MR Pro 300

Everything that fits a MR Pro 300

Used Rieju MR Pro 300s for sale

None listed right now. Selling one? List it free →

Other Rieju models

Rieju MR Pro 300: Service Intervals, Parts and Used MR Pro 300s for Sale | MWMX